Monday, January 20, 2020

Mechanical and pneumatic paper punches

We have created similar paper punches with mechanical and pneumatic operation. 
Mechanical paper punch

Pneumatic paper punch


There are different custom punching tool sets are available. The punching tools made of hardened tool steel with Electrical discharge machining (EDM)


You can put even more sets of tools into the device.



Saturday, January 4, 2020

Paperfox MP-5 die cutter prototype

Here is our new prototype:



If someone needed a bigger press, we could only solve the problem so far by modifying the machines already in production.



With the new press, you can punch up to A6-sized punches. 
We do not yet know what accessories and prices we will make for this press, and we will thank you for your suggestions.



Coreless rewinder prototype

You don't need to use paper cores to rewind paper, plastic foil, corrugated paper or other similar roll materials, because we've developed the Paperfox CLR-5 coreless rewinder
Thanks to a completely new operating principle, the machine is smaller, lighter and cheaper than any other similar device.
The Paperfox CLR-5 coreless rewinder can rewind roll materials up to 70cm width. The length to rewind and some other parameters can be set with a programmable controller.


How is it made?

First we tried to solve the problem in a traditional way. The machine was big, heavy and it had a lot of expensive components. In addition it don't worked well with all kind of paper.


Then we find out a completly new solution to this task. In the following video you can see our first trial to test the new principle:


The test was successful, so we created the first working prototype:


Then we reduced the size and applied a programmable controller to adjust the desired length to rewind and some other parameters.


The construction is still subject to change, we are open to any suggestions.
I hope it'll be a very successful product in the future.