Arty Rounded Corners

With the Paperfox MP-1 paper punch you can not only punch paper, but you can also round corners. 

 

But hy should you round a corner if you can simple bite it off?

Die cut letters

One of the questions we are asked quite often is how to die cut letters or other shapes positioned to the motive of the sheet or positioned to the already cutted letters or shapes. There is a simple solution to this problem. Jost mount a plexy plate with a hinge to the wodden body of the steel rule die cutting tool.

You can use this plexy plate as a cutting plate and you can position the sheet which you want to punch to the impressed shape lik in the following video.

MPEA-2 Table for Paperfox MPE-2 electric paper punch

If you use the MPA-2 table with the MPE-2 electric paper punch, you have to remove the automatic start switch and you can start tha machine only with a foot schwitch.
Now we made a table for MPE-2 witch you can mount on to the MPE-2 without removing the start switch.

You can mount the MPEA-2 table on to the MPE-2 electric paper punch on the back side in a same way as you can mount the MPA-2, but in the front we have used an other table support.

Cold laminator prototype

We have  produced a new cold laminator.

The machine has two big tables so you can laminate even 70x100 cm sheets with this laminating machine.

If you mount a roll holder on to the feeding table, then you can laminate roll materials up to 70cm width.

After laminating you can cut the roll materials to sheets with a simple knife.

Stronger Rewinder

We have equipped our A-1000 rewinder with a stronger industrial gear motor and with cutting knives.

Now you can rewind bigger rolls with this machine and you can cut it to several smaller rolls.

If you want to cut the rolls or paper tubes without rewinding you can do it with our TV-2 roll cutter.

Paper drill

You can fix any kind of paper drill into a drill machine with this small equipment.

Just place this converter between the drill machine and the drill chuck and enjoy the paper drilling!

KS-2 Laminator

We've manufactured a really simple laminator wirh two rubber cylinder. The lower cylinder is manually driven, the upper one is free running.
You can lay self adhesive paper and foil to any kind of sheet material.