CR-32 creasing machine

Thank you for the lot of ideas, suggestions about the "very simple creasing machine" which we have developed few months ago. Now we have made some improvements according the wishes of our customers.

We increased the width of the device from 21 cm to 32 cm, so now you can crease across even A3 sheets.

We changed the paper guide at the side of the device to a parallel guide so now you can position the sheets more accurately.

We named the device to Paperfox CR-32 creasing machine, and I hope tha we can start the manufacturing soon.

Crazy solutions to avoid the usage of the Paperfox EVV-3 cardboard edge protector cutter.

You don't need to buy the EVV-3 cadboard edge protector cutter to cut cardboard edge protectors, because we collected some really creative solutions to perform this task:

Good news: You don't have to suffer with alternative solution long, the Paperfox EVV-3 cadboard angle protector cutter will be available soon.

What kind of knives can you use in your Papefox TD-1 tape applicator?

In the Paperfox TD-1 Tape Applicator you can use different knives.
There is no "best solution", the optimal knife profile depends on the tape and the material on which you want to stick the tape.

1. Rotary cutting rules

There are several manufacturer which offers rotary cutting rules. We used Böhler rules. Rotary cutting rules show a serrated cutting edge for easy penetration into the board.

Advantages:

• This knife produces a semi-straight, toothed cutting line
• There are different tooth profil available

Disadvantages:

• Sometimes it is not easy to buy Rotary cutting rules
• With some type of adhasive bands the knife collects the glue and dirt between teeth
• You have to cut the blade to insert it into the machine.

2. Martor Nr. 763 blades.

Avantages:

• Quiete a sharp knife
• This knife produces a semi-straight, toothed cutting line

Disadvantages:

• The manufcturer is going to finish the manufacturing of this knife.
• You have to cut the blade in two to insert it into the machine.

3. OLFA MCB-1 knife.

Advantages:

• This knife is available worldwide in paper od decoration shops in 5 pcs. packets. So you can get is easily.
• You can mount it without any modification into the Paperfox Tape dispensers.
• Very sharp knife, so it cuts even the strong tapes.
• Because of the simly shape of the knife it don't collects the glue and dirt between teeth.

Disadvantages:

• The cutted ends of the tape are not sraight they are "V" shaped.
• If the tape is not symmetric (assimmetric finger lift tapes) it can push the tape aside.
• This knife is drangerous, it can couse injuries.

A very simple creasing machine

Some customer of us was looking for a cheap creasing device so we constructed the following device.

The creaser operates a creasing rule. A lot of kind of creasing rule can be mounted on the device wich are used in die cutting tools.

The opposit part of the creaser is a Cito creasing channel.

Could you use a simple device like this in your work?

Embossing with KB-32 paper punch

We offered the Paperfox KB-32 press until now "only" for die cutting, punching, creasing, perforating. Now we inserted an embossing tool into this device.

So now you can use also for embossing this cute device.

Cylinder die cutter with plastic-surface cylinders

The Paperfox H-1 clinder die cutter is a cool device we have a lot of satisfied cutomers.
An ethusiastic uer of this brilliant device suggested us to enhance the machine with a plastic-surface cylinder.

The work with this device is not only quicker but also more confortable in this way.
We don't know yet how long is the lifetime of the new cylinder but the operational experience is very promising.

New edge protector cutter prototype

The Paperfox EVV-1 Edge Protector Cutter can cut only edge protectors up to 50x50x5mm.
Now we have developed a prototype which can cut edge protectors up to 80x80x8mm.

We hope that we can start to manufacture this device soon.