A rewinder again...

Here is a new rewinder for 165 cm vide rolls. The inner diameter of the upwinding roll is 32mm.

Programmable tape applicator

Wie have constructed a 72cm breit rollentable for two TD-1 tape applicator heads and attached a progammable controller to thedevice.

Now you can position the tape independetly on booth TD-1 tape applicator heads and you can interrupt the tapa laying and start it again in a sheet.

Lets have a look at how this device works in the following video:

Return receipt making machine with new features

Did you know that Certified Mail forms are slightly different in different countries?
We had to modify the Paperfox HH-1 return receipt making machine to be able to use lighter paper and to be able to stick double sided self adhesive strips on booth side or just on one side of the paper.

So we equipped the Paperfox HH-1 return receipt making machine with an additional set of guiding rollers to ensure a straight pass through of the paper even if the machine applies adhesive tape only on one side.

In addition to the normal shut off valve, we installed an other manual valve to switch off one of the TD-1 tape applicator heads if it is not needed.

The other parameters of the device are didn't changed. The Paperfox HH-1 return receipt making machine can handle two rolls of 6...12mm wide "finger lift" double sided selfe adhesive rolls. The inner core diameter is 76mm the maximal external diameter of the rolls is 300mm.

The Paperfox HH-1 return receipt making machine has a counter to count the sheets processed. you can set the position of the tape application roughly with the position of the optosensor, and finely vith the manual pneumatic valves on the pneumatic cylinders. 

The upper valve sets the start position of the tape lying (if you close the upper valve then the distance of the tape start position increases from the sheet edge) the lower valve sets the end position ((if you close the lower valve then the end position getting closer to the back side of the paper).

There is no English operational manual at this moment about this device, but you can find more information in the  TD-1 tape applicator operational manual.

A simple solution for positioning in the KB-32 paper punch

You can change the creasing tool in the Paperfox KB-32 Punching, creasing machine to a die cutting tool. In this case the positioning guide of the KB-32 alone can't position the sheet well. Here is a simple solution without much extra costs for this problem.

Use a simple office document clips to position the material to punch in the Paperfox KB-32 Punching, creasing machine.

Grommet Fastener Set

Why did we manufacture a double head Grommet Fastener Set?

- With self-piercing grommets: The self-piercing grommets can't cut its own hole in all materials.
- With combined tools: The grommet fastening tool is expensive, the punch tool should be from time-to-time changed. The combined tool even more expensive and it should be often changed or resharpened.
- With our double head Grommet Fastener Set: The grommet fastener tool is durable, the punching tool is cheap so there is no much costs with keeping it sharp.

Tape Application System with 2 Tape Heads

Now you can apply even two different kind of double sided self adhesive tapes in different length at once with this semiautomatic tape applicator.

Max. sheet width: 52cm
Tape width: 6...12mm
Maximal roll diameter: 300mm
Speed: 0.16/0.23/0.3 m/sec.  (~ 2000 A4 sheet/hour)

Blister cutter for the pharmaceutical market.

Paperfox has developed a new positioning solution for the Paperfox KB-32 press to cut pharmaceutical packagings to smaller portions.